Dryer Vent Cleaning Kit with Flexible Nylon Rods (40 FT)

Inside-the-wall vent cleaning

Dryer Vent Cleaning Kit with Flexible Nylon Rods 40 FT

Reach deeper through longer wall vents from inside to outside.

Designed for standard 4-inch residential dryer vents.

Reach: 40 FT
Duct size: Standard 4 inch
Use: Hand or drill

Length

30 FT 40 FT

$38.99 $59.99

Save 35%

Complete kit: flexible nylon rods, two brushes, drill adapter, tape, and work glove.

Quantity In stock · Ready to ship

Free shipping $30+
30-day returns
Secure checkout

Taxes and shipping calculated at checkout.

See what was hiding inside.

Drag to reveal the clean.

A front-facing dryer vent opening with gray lint around the duct interior before cleaning

The same front-facing dryer vent opening cleaned, with removed gray lint collected on the floor

BEFORE AFTER

Illustrative cleaning result. Lint volume varies by vent condition.

Choose the reach
that fits your route.

30 FT

For a measured cleaning path up to 30 FT, with enough rod left outside the duct for control.

Example dryer vent cleaning route within a 30-foot reach

40 FT

For a measured cleaning path over 30 FT or a route with several turns and a longer run.

Example longer dryer vent cleaning route within a 40-foot reach

What's in the kit

The six supplied rod segments shown represent the product construction; total reach depends on the selected kit.

Flexible nylon rods
(40 FT total)

Four-inch round dryer vent brush with its white rod connection

4-inch round brush

1.2-inch narrow brush

Drill adapter

Tape

Work glove

Secure

Tighten the silver adapter firmly in the drill chuck.

Connect

Twist each threaded rod together clockwise.

Clean

Advance and withdraw the brush while rotating clockwise.

What comes in the 40 FT kit?

The kit includes a flexible nylon rod system with up to 40 FT of reach, one 4-inch round vent brush, one 1.2-inch narrow brush, a drill adapter, electrical tape, and a work glove.

Which dryer vents is this kit designed for?

It is designed for most standard 4-inch residential dryer vents. Check the duct size, route, bends, and access points before use.

Can I use the rods by hand or with a drill?

Yes. The flexible rods can be used manually or connected to a compatible drill with the included adapter.

Which brush should I use?

Use the 4-inch round brush for standard dryer-vent ducts and the 1.2-inch narrow brush for smaller accessible openings and lint-trap areas.

How do I connect the rods securely?

Secure the adapter, connect only the number of rods needed for the vent run, and confirm each threaded connection before feeding the brush into the duct.

Which direction should the brush rotate?

Rotate clockwise only while advancing and withdrawing the brush. Continuing clockwise rotation helps keep the threaded rod connections secure.

What does the 40 FT reach help clean?

The extended reach is suited to longer dryer-vent runs, exterior vent openings, lint-trap areas, and other accessible sections of a residential vent system.

How do shipping and returns work?

Review our current shipping policy and returns and refunds policy before ordering.