GOHALL Dryer Vent Cleaning Kit with Flexible Nylon Rods – 40 ft

Gohall Dryer Vent Cleaning Kit with Flexible Nylon Rods – 40 ft

$38.99 $59.99
Skip to product information
GOHALL Dryer Vent Cleaning Kit with Flexible Nylon Rods – 40 ft
Gohall Dryer Vent Cleaning Kit with Flexible Nylon Rods – 40 ft

Dryer Vent Cleaning Kit

With flexible nylon rods · 40 FT

$38.99 $59.99

Remove vent lint by hand or with a compatible drill

For standard 4-inch residential dryer vents

Choose your reach
30 FT$32.99 40 FT$38.9910 FT extra
Which length should I choose?

40 FT adds 10 FT of connected rod length for longer accessible runs. Measure your route and leave enough rod outside for control.

Quantity In stock
What’s included
  • Flexible nylon rods · up to 40 FT connected
  • 4-inch round brush
  • 1.2-inch narrow brush
  • Drill adapter
  • Electrical tape
  • Work glove

Drill and collection bag not included.
Illustrated example. Not to scale.

Follow the vent, section by section

  1. Prepare

    Turn off and unplug the dryer. Follow its instructions to access the vent.

  2. Connect

    Secure the brush and check each threaded connection. Add rods as needed.

  3. Clean

    Rotate clockwise only, going in and coming out. Stop if the brush cannot move freely.

Full instructions

See what comes out

A front-facing dryer vent opening with gray lint around the duct interior before cleaning
The same front-facing dryer vent opening cleaned, with removed gray lint collected on the floor
Before After
Illustrative cleaning result. Lint volume varies by vent condition.

Good to know

Will it fit my dryer vent?
It is designed for standard 4-inch residential dryer vents. Check the vent route and access before use.
Should I choose 30 FT or 40 FT?
40 FT gives you 10 FT more total connected rod length. Measure your accessible route and leave enough rod outside for control.
Do I need a drill?
You can use the kit by hand or with a compatible drill.
Which brushes come with each kit?
Both kits include a 4-inch round brush and a 1.2-inch narrow brush.
What is not included?
A drill and collection bag are not included.
What should I do before cleaning?
Turn off and unplug the dryer. Follow the dryer manufacturer's instructions to access the vent.
How do I connect and turn the rods?
Secure the brush and each threaded connection, adding rods as needed. Rotate clockwise only when inserting or withdrawing the brush.
Can it reach around bends or blockages?
Bends, access and obstructions can limit reach. Stop if the brush cannot move freely.
Cutaway illustration of connected cleaning rods following a dryer vent route, with a threaded connection detail.