Pet Water Fountain Cleaner Tablets
Helps remove limescale and mineral buildup.
$28.99
24 tablets- Limescale & mineral buildup
- Clean beyond the bowl
- 24 individually wrapped tablets
24 tablets provide 6–24 cleans, depending on water volume. A box lasts a year only when use averages no more than 2 tablets per month.
Keep pets away during cleaning and rinsing. Never let pets drink cleaning solution.
Clean beyond the bowl
Look for buildup around the pump, reservoir and water outlet.
Pump housing
Check the outer housing for buildup.
Removable impeller
Access parts as your fountain’s instructions allow.
Reservoir + outlet
Check the basin and the places water passes through.
Recirculating pet fountains
Check that your fountain’s care guide allows an acid-based cleaner on the fountain and removable parts.
Plastic fountains
Common central-outlet designs
Stainless steel fountains
Central outlets and gooseneck designs
Clean. Rinse. Refill
For compatible recirculating fountains
Allow time for preparation and rinsing. 15–20 minutes is the circulation step.
Start here
Prep the fountain
Unplug, drain and remove the filters. Keep pets away.
Dose by volume
Add water + tablets
Add warm water. Unwrap and add the tablets shown for your cleaning-water volume.
3 minutes
Let it dissolve
Wait 3 minutes for the tablets to dissolve before running the fountain.
15–20 minutes
Run the fountain
Circulate for 15–20 minutes. Unplug, then drain the cleaning solution completely.
2 minutes per rinse
Rinse thoroughly
Run fresh water for 2 minutes. Unplug and drain. Complete 2–3 rinses in total until no residue remains.
Ready after rinsing
Refill with fresh water
Unplug before handling parts. Wipe, refit the filters and add fresh drinking water.
Match the dose to the water
Use the actual cleaning-water volume, from 1 to 16 L. For example, 3.2 L uses 1 tablet.
| Water volume | Tablets |
|---|---|
| 1 L to under 4 L | 1 tablet |
| 4 L to under 7 L | 2 tablets |
| 7 L to under 12 L | 3 tablets |
| 12–16 L | 4 tablets |
For less than 1 L or more than 16 L of cleaning water, contact Gohall before dosing.
Keep pets away during cleaning and rinsing. Return the fountain only after thorough rinsing and a fresh-water refill.
Made for mineral buildup
An acid-based formula helps loosen white limescale and mineral deposits left by water.
24 individually wrapped tablets
Unwrap what your fountain needs. Keep the remaining tablets sealed until your next clean.
Cost per clean depends on the amount of water used.
Product FAQ
Full instructions →Can I clean it while my pet drinks from the fountain?
No. Keep pets away during cleaning and rinsing. Drain all cleaning solution, rinse thoroughly and refill with fresh drinking water before pets use the fountain.
What should I do with the filters?
Remove the filters before adding cleaner. Refit them after cleaning and rinsing, following the fountain manufacturer’s instructions. Replace worn filters on the manufacturer’s schedule.
How do I rinse the fountain?
Unplug and drain all cleaning solution. Add fresh water, run the fountain for 2 minutes, then unplug and drain. Complete 2–3 rinses in total until no residue remains. Refill with fresh drinking water only after rinsing is complete.
How many tablets do I need?
Measure the cleaning water you will use. From 1 L to under 4 L: 1 tablet; from 4 L to under 7 L: 2 tablets; from 7 L to under 12 L: 3 tablets; from 12 to 16 L: 4 tablets. For example, 3.2 L uses 1 tablet. For less than 1 L or more than 16 L, contact Gohall before dosing.
How often should I clean the fountain?
Follow the fountain manufacturer’s cleaning schedule and check the basin, outlet and accessible pump parts for buildup. Cleaning frequency depends on the fountain and your water.
Will it work with my fountain’s material?
Check that your fountain’s care guide allows an acid-based cleaner on the fountain and removable parts.
Does cleaning replace filter changes?
No. Follow your fountain manufacturer’s filter-replacement schedule.
Make fountain care a routine
Back to purchase